Carpenter Saw

Saws crafted for Professional woodworkers

RYOBA 250

Double Edge S-250

Ideal for Cross / Rip cutting sawn wood, plywood, solid wood, laminated board etc.

IRON240

Ideal for cutting wood, plywood, bamboo and plastic material.

CROSS FINE H-225

Ideal for fine cross cutting of either hardwood or softwood.

CROSS H-250

Designed for precise and fine cross cutting in solid wood.

RIP FINE H-250

Ideal for cutting along the grain of softwood or hardwood finely and squarely.

UNIVERSAL H-250

Ideal for Cross / Rip / Slant cutting plywood, laminated wood, solid wood etc.

CROSS H-265

Ideal for cross cutting conventional sawn wood, plywood, laminated board etc.

CROSS CONVEX H-265

Ideal for making joineries like various half -lap joints of either softwood or hardwood.

UNIVERSAL H-300

Ideal for Cross / Rip / Slant cutting the sawn wood, plywood, solid wood, laminated wood etc.

RIP  COARSE H-300

Ideal for cutting along the grain of hardwood or softwood aggressively.

CROSS CONVEX H-300

Ideal for making large tenons or joineries like various half-lap joints where the straight bottom line is required.

HEAVY DUTY H-333

It is ideal for working in narrow space and precise cutting.
It is possible to cut cross, rip and slant by universal teeth.
You can attach hook type blade interchangeably

V HANDY 200 FINE

Great portability with HANDY FINE H-200 blade.
You can attach hook type blade interchangeably Flush cutting is also possible.

HEAVY DUTY H-333

It is ideal for flush cutting.
Since the teeth without kerf don’t wound the surface, it is useful when flush cutting,It is possible to cut cross, rip and slant by universal teeth.

HEAVY DUTY H-333

Ideal for Cross / Rip / Slant cutting plywood, laminated board, solid wood etc.

Handy Utility H-200

Ideal for cutting solid wood, Plywood, Block board in confined spaces.

HARDWOOD H-250

Ideal for cutting hardwood like Ebony, Oak, Beech etc.

UNIVERSAL H-265

Ideal for Cross / Rip / Slant cutting the sawn wood, plywood, solid wood, laminated board etc.

V HANDY200 Carpentry

A NEW FOLDING SYSTEM FOR HANDY UTILITY H-200.

VⅢ265

Ideal for Construction woodworkers, Carpenters for cutting Cross Laminated Boards and various dimentioned timbers without minding grain direction.

FLUSH S-145

Ideal for flush cutting dowels and bamboo nails etc.

TUCK-IN 240 CARPENTRY

Ideal for precise wood works on sawn wood,plywood,laminated wood,composit panel etc.

↑Page top