VⅢ265

■ Blade length 265mm ■ Pitch 1.75mm

■ Thickness 0.60mm ■ Kerf 0.92mm

Ideal for Construction woodworkers, Carpenters for cutting Cross Laminated Boards and various dimentioned timbers without minding grain direction.

CROSS H-265

■ Blade length 265mm ■ Pitch 1.75mm

■ Thickness 0.60mm ■ Kerf 0.92mm

The flagship of Z-saw carpentry saw - Ideal for cross cutting conventional sawn wood, plywood, laminated board, etc.

HANDY UTILITY H-200

■ Blade length 200mm ■ Pitch 1.75mm

■ Thickness 0.50mm ■ Kerf 0.70mm

200 mm long compact body with sharply ground Universal teeth (Rip/Cross/Slant cut) for cutting wood in all directions is ideal for cutting solid wood, Plywood, Block board in confined spaces.

UNIVERSAL H-265

■ Blade length 265mm ■ Pitch 1.75mm

■ Thickness 0.60mm ■ Kerf 0.92mm

Specially ground chisel like teeth in every several cross cutting teeth can efficiently carry out sawdust, and cut the wood in all directions.

HARDWOOD H-250

■ Blade length 250mm ■ Pitch 1.75mm

■ Thickness 0.50mm ■ Kerf 0.68mm

Specially designed robust and sharp teeth are ideal for cutting Maple, Ebony, Mahogany, Oak etc.

CROSS CONVEX H-265

■ Blade length 265mm ■ Pitch 1.75mm

■ Thickness 0.60mm ■ Kerf 0.88mm

Convex contour line of the blade can cut wood deeply without slipping in the kerf, and easily achieve a straight bottom line of various half-lap joints of either softwood or hardwood.

CROSS CONVEX H-300

■ Blade length 300mm ■ Pitch 2.15mm

■ Thickness 0.70mm ■ Kerf 1.00mm

Coarse convex saw blade can make the teeth always keep touching the wood amid strokes and easily cut out the straight cutting lines, which is critical for making joineries.

CROSS FINE H-225

■ Blade length 225mm ■ Pitch 1.20mm

■ Thickness 0.40mm ■ Kerf 0.56mm

The finest single edged saw without a spine along the blade back is designed for making deep cuts for wood joineries or other precise woodworks.

RIP FINE H-250

■ Blade length 250mm

■ Thickness 0.50mm ■ Kerf 0.70mm

The finest Rip cutting saw in Z-saw range-0.5mm thin blade with narrow & even saw set is designed for cutting along the grain finely and accurately.

RIP COARSE H-300

■ Blade length 300mm

■ Thickness 0.66mm ■ Kerf 0.93mm

Tough saw blade with graduated teeth from heal to toe is designed for aggressively cutting along the grain of either hardwood or softwood.

UNIVERSAL H-250

■ Blade length 250mm ■ Pitch 1.40mm

■ Thickness 0.50mm ■ Kerf 0.66mm

Thin saw blade with specially ground universal teeth(for rip, cross, slant cutting) is ideal for fine woodworks on conventional sawn wood, plywood, laminated board etc.

HEAVY DUTY H-333

■ Blade length 333mm ■ Pitch 2.80mm

■ Thickness 0.80mm ■ Kerf 1.10mm

Sturdy saw blade with tough universal saw teeth ( for rip, cross, slant cutting ) is deal for heavy duty construction woodworks.

DOUBLE EDGE S-250

■ Blade length 250mm ■ Pitch 1.40mm

■ Thickness 0.50mm ■ Kerf 0.70mm

Once the indispensable armor of Japanese professional carpenters, convenient when both cross and rip cutting are necessary.