D.I.Y. Kit

Ideal for Cross / Rip / Slant cutting solid wood , Plywood , Block board etc.

Designed for Rip / Cross / Slant cutting of sawn wood , Plywood , Block board etc.

Designed for cutting wood at 45°and 90°vertically and horizontally with Universal S-265.

Designed to be used with Universal S-265 to cut wood at any angles from right 45°to left 45°　horizontally and vertically.

Ideal to be used with Universal S-175 to cut wood at right & left 45°and 90°squarely.

Designed for cutting tight curves , circles and other geometric shapes on solid wood , Plywood and some other laminated boards etc.